BMS 3S 12V 10A 20A 30A 40A 60A for 18650 Lthium Li-ion battery pack

1. Model: DLG3S 10A-60A (for 3.7V Rated Li-ion battery not for 3.2V Rated LiFePO4)Common Version : charge/discharge share the same oneSeparate Version : charge/discharge port are d

1. Model: DLG3S 10A-60A (for 3.7V Rated Li-ion battery)

Common Version : charge/discharge share the same one

Separate Version : charge/discharge port are different

We can customize any PCB from 2S to 24S lithium batteries with different current.

2. Basic Parameter

◆Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

◆Strong load ability, constant discharge current 10A/25/35A/45A/60A, use high voltage resistance, low inner

resistance power Mosfet. The heat sink will greatly help cooling.

◆IC itself has power balancing function. The circuit is simple and reliable.

◆Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection

function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.

◆Extreme low power consumption. The consumption of the whole device is less than 50uA.

◆PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

3. Basic Parameter

Application: 3.7V rated Lithium battery pack

With Balance: Yes

Water Proof: IP67

Short Circuit Production: Yes

Charge Current: 12.6V

Discharge Current: 8.4V

Continuous Current: 10A 20A 30A 40A  60A

Peak Current: 30A 50A 60A 100A 180A 180A

Over Current Protection: 30A 50A 60A 100A 180A 180A



Deligreen Power